Interior Detail:

• Secure customer’s personals (loose change, sunglasses, pens,
  notepads, etc.) in Zip Loc bags and set aside.
• Remove floor mats from interior.  Blow clean with 90 psi of
  compressed air.  Scrub dry soil with carpet brush and vacuum clean. 
  Spray generous amount of high-foaming carpet shampoo.  Scrub with heated
  steam to bring embedded dirt to surface.  Inject high temperature water
  into carpet followed immediately with high suction steam from carpet
  shampooer.  Allow floor mats to air dry for 1 hour.
• Using compressed air gun (90 psi), "blast" dust from vents, console,
  dash, under seats, between seats, upholstery seams, in crevices and hard
  to reach places, between seat cushions, into map pockets, into cockpit
  switches and controls, steering wheel gaps, trim pieces…anywhere
  fingers cannot clean.  Vacuum out resulting dust and dirt.
• Clean headliner stains with
  
  Desiderio  vapor steamer.  View videos of the
  Desiderio vapor steamer in use
  here.
• Clean upper trim parts (upper seat belt anchors, plastic pillar
  facades) with appropriate cleaners and degreasers.
• 
  Clean leather seats and head rests with appropriate brushes and clenaers. 
  Be sure to clean deep in seams, creases, along piping, and in map
  pockets.  Apply leather conditioner when dry.
• Apply high foaming upholstery shampoo to cloth seats.  Scrub into a
  foam.  Extract clean with vapor steam and vacuum suction.
• Clean all surfaces in trunk area.  Remove spot stains as necessary
  from trunk liner.  Lift trunk liner and vacuum/clean spare tire.  Push
  seats forward to vacuum crease where rear seats meet trunk.  Wipe trunk jambs and decklid.
• Clean lower trim parts (door sills, lower seat sections, foot wells,
  door panels, map pockets, ash trays, door handles, door pulls, windows
  switches with appropriate cleaners and degreasers.
• Scrub clutch, brake, and gas pedals clean with appropriate cleaners
  and degreasers. 
• Apply high foaming carpet shampoo to all carpeted surfaces.  Scrub
  with pressure to create foam.  Extract clean with vapor steam and vacuum
  suction.
• Inspect vehicle for errors.  Return keys to customer. 
  Allow inspection of vehicle of customer.  If work is acceptable,
  present with receipt and accept payment
  
  (cash, check, Visa, MasterCard, American Express, Discover).

Exterior Detail:

• Pre-treat door jambs, wheel wells, trunk jambs, frame rails, and
  grill with mild degreaser/cleaner.
• Pressure wash all door jambs, wheel wells, trunk jambs, frame rails,
  grill, window seals, door seals, emblems, key holes, door handles, gas
  filler area with 1500 psi of water.
• Wash car  by hand with clean microfiber wash mitt and mild car wash
  detergent.  Scrub license plates clean with appropriate brushes and
  cleaners.
• Hand clean wheels with industrial strength wheel cleaner and
  assorted brushes and degreasers.  Pressure wash wheels and wheel well with 1500 psi of water.
• Remove large deposits of road tar, bugs, and tree sap using multiple
  applications of
  Stoner’s Tarminator.  In some cases, lacquer thinner must be used to
  remove exceptionally embedded contaminants.
• Hand dry vehicle with damp chamois towel.  Door seals, window seals,
  trim pieces, trunk jambs, emblems, and external mirrors must be
  "blasted" dry with 90 psi of compressed air.
• Polish and wax all painted surfaces with
  Cyclo
  polisher, mild compounding/polishing foam pad, and high gloss
  
  Klear Kote Vanilla Hand Wax.  Minor surface scratches are removed, paint achieves a
  reflection superior to new condition, and the embedded wax provides
  approximately 6 - 12 weeks of protection from dust collection, water
  spotting, and UV fade if car is washed every 10 - 14 days.
• Dress tires and wheel wells with high-silicone rubber/plastic
  dressing.
• Adjust tire pressure in all tires to manufacturer’s suggested PSI.
• Inspect vehicle for errors.  Return keys to customer.  Allow
  inspection of vehicle of customer.  If work is acceptable, present with
  receipt and accept payment (cash, check, Visa, Mastercard, American
  Express, Discover).

Paint Sealant Package:

• All services included with full or exterior detail plus:
• 
  Remove surface contaminants from entire car using detailer’s clay. 
  A small amount of high density clay is rubbed over every surface (glass,
  plastic, and metal) with mild hand pressure to remove imbedded
  contaminants such as brake dust, paint overspray, road tar, and hard
  water spots.  Read here
  to learn more about the benefits of detailer’s clay.
  
• Machine compounding with appropriate grit
  
  Meguiar’s compound and foam pad.  Compounding removes medium and
  light scratches and heavy swirling caused by aggressive car washing and
  high speed rotary buffer application.
• Wipe clean.  Apply
  Jeffs Werkstatt Prime acrylic wax primer by hand.  Let dry to a haze.  Remove with Cyclo polisher using green polishing pad.
• Hand apply
  Jeffs Werkstatt Acrylic Jett.  Remove by hand with clean microfiber
  towel.
• Results:  exhibition-quality shine, gloss and depth.  4-6
  month 
  protection from dust collection, water spotting, and UV fade (assuming
  car is washed every 10-14 days).

Prices: