Secure customer’s personals (loose change, sunglasses, pens, notepads, etc.) in Zip Loc bags and set aside.
Pre-treat door jambs, wheel wells, trunk jambs, frame rails, and grill with mild degreaser/cleaner.
Pressure wash all door jambs, wheel wells, trunk jambs, frame rails, grill, window seals, door seals, emblems, key holes, door handles, gas filler area.
Wash car by hand with clean microfiber wash mitt and mild car wash detergent. Scrub license plates clean with appropriate brushes and cleaners.
Hand clean wheels with industrial strength wheel cleaner and assorted brushes and degreasers. Pressure wash wheels and wheel well with 1500 psi of water.
Remove large deposits of road tar, bugs, and tree sap using multiple applications of Stoner’s Tarminator. In some cases, lacquer thinner must be used to remove exceptionally embedded contaminants.
Hand dry vehicle with damp chamois towel. Door seals, window seals, trim pieces, trunk jambs, emblems, and external mirrors must be “blasted” dry with 90 psi of compressed air.
Polish and wax all painted surfaces with Cyclo polisher, mild compounding/polishing foam pad, and high gloss Klear Kote Vanilla Hand Wax. Minor surface scratches are removed, paint achieves a reflection superior to new condition, and the embedded wax provides approximately 6 - 12 weeks of protection from dust, water spotting, and UV fade if vehicle is washed every 10-14 days.
Dress tires and wheel wells with high-silicone rubber/plastic dressing.
Remove floor mats from interior. Blow clean with 90 psi of compressed air. Scrub dry soil with carpet brush and vacuum clean. Spray generous amount of high-foaming carpet shampoo. Scrub with heated steam to bring embedded dirt to surface. Inject high temperature water into carpet followed immediately with high suction steam from carpet shampooer. Allow floor mats to air dry for 1 hour.
Using compressed air gun (90 psi), “blast” dust from vents, console, dash, under seats, between seats, upholstery seams, in crevices and hard to reach places, between seat cushions, into map pockets, into cockpit switches and controls, steering wheel gaps, trim pieces…anywhere fingers cannot clean. Vacuum out resulting dust and dirt.
Clean headliner stains with Desiderio vapor steamer. View videos of the Desiderio vapor steamer in use here.
Clean upper trim parts (upper seat belt anchors, plastic pillar facades) with appropriate cleaners and degreasers.
Clean leather seats and head rests with appropriate brushes and clenaers. Be sure to clean deep in seams, creases, along piping, and in map pockets. Apply leather conditioner when dry.
Apply high foaming upholstery shampoo to cloth seats. Scrub into a foam. Extract clean with vapor steam and vacuum suction.
Clean all surfaces in trunk area. Remove spot stains as necessary from trunk liner. Lift trunk liner and vacuum/clean spare tire. Push seats forward to vacuum crease where rear seats meet trunk. Wipe clean trunk jambs and decklid.
Clean lower trim parts (door sills, lower seat sections, foot wells, door panels, map pockets, ash trays, door handles, door pulls, windows switches with appropriate cleaners and degreasers.
Scrub clutch, brake, and gas pedals clean with appropriate cleaners and degreasers.
Apply high foaming carpet shampoo to all carpeted surfaces. Scrub with pressure to create foam. Extract clean with vapor steam and vacuum suction.
Clean exterior and interior glass using Cobra Glass-Specific Microfiber towels and Stoner’s Invisible Glass glass cleaner. Repeat 2-3 times to remove all hazing and streaks. Remove glue, tree sap, and stickers when necessary using lubricated razor and adhesive remover.
Return customer’s personal items to car.
Inspect vehicle for errors. Return keys to customer. Allow inspection of vehicle by customer. If work is acceptable, present with receipt and accept payment (cash, check, Visa, MasterCard, American Express, Discover).
Leave a reply
You must be logged in to post a comment.